Category Archives: Chemical products

What Are the Methods to Remove Oxygen from Natural Gas?

Gas fields infected with oxygen can be found all over the world, with landfill gas being the most frequent. It is necessary to remove oxygen from natural gas. This patent-pending technique can treat gas at any amount or O2 content while being simple to operate and low in cost.

Oxygen-contaminated gas streams come in a variety of shapes and sizes. Oxygen is present in a variety of natural gas streams. Vacuum devices and typical pipeline systems are examples of contaminated streams. Dumpsites and coal mine methane are examples of vacuum systems that can carry several percent oxygens, whereas standard pipelines may only have 100 ppm of o2.

Why is it necessary to eliminate oxygen from natural gas?

When oxygen removal from removal gas is detected in a gas, it can create a variety of issues, including the breakdown of process chemicals (e.g. amine), increased pipeline corrosion, and exceeding pipeline standards of 10 ppm. These gas streams are typically abandoned, but the X-O2 technology can treat them to make them useful and profitable again nonionic surfactants.

Systems for Removing Oxygen 

Oxygen removal devices are rarely used, and these gas streams are often discarded or mixed to meet pipeline requirements. The scarcity of oxygen removal systems in the natural gas sector is due to several factors, like high capital costs, an absence of industrial competence, and a low oxygen extraction range.

Oxygen Removal Technologies

A stand-alone system removes oxygen from natural gas using a catalytic reactor and is typically used as the final stage in the waste gas filtration process. Because biogas has a high water content as it departs the reactor, it must be dehydrated, which is commonly accomplished using a TSA method or a desiccant dryer.

Oxygen Removal Requirements

The hydrogen sulfide removal from biogas natural gas is dangerous because it can enable processing machinery to corrode, raising upkeep and replacement costs. Furthermore, oxygen becomes sulfur when it combines with hydrogen sulfide. Oxygen affects purge streams by oxidizing glycol liquids used in drying facilities or creating salt in acid gas removal devices.

Expert Insight

Natural gas is hard to differentiate from oxygen. Not only is the science lacking in terms of development and availability, but the market potential is deemed to be restricted. The sector has yet to establish experience and competence due to the high expense of such a removal operation and a lack of adequate channels.

Natural Gas BTUs

The industry is currently pursuing landfill gas recovery facilities to create BTU gas to be delivered through the pipeline because of rapidly rising energy costs. Even without the subsidies and tax incentives, this is becoming an appealing option.

The bigger hydrocarbons are preferred since they require lesser temperatures for the reaction to take place. This enables larger oxygen levels to be treated in streams containing heavier hydrocarbons than in channels containing simply methane as the source of energy. Hydrogen sulfide removal is used as a source of fuel in some cases. Supplemental hydrogen can be injected into the gas stream to assist the oxygen removal from natural gas if it is not already present in adequate volumes.

Contact Us:

Chemical Products Industries, Inc.

Address: 7649 SW 34th St, Oklahoma City, OK
Phone: (800) 624-4356

Tips to Hire Oxygen Removal from Natural Gas Services

Oxygen is present in the natural environment and it’s in the natural gas too. We all know that to start the fire Oxygen is required but in the case of natural gas, this element is removed. Why? This is because, when Oxygen is present in natural gas, it can create several issues like exceeding pipeline specifics, increasing corrosion level in the pipes, and degradation of processed chemicals. Oxygen in the pipelines of natural gas exceeds the specification which should be at 10 ppm. Here in this article let’s know more about Oxygen Removal from Natural Gas and how you should hire service for that.

Types of oxygen found in natural gas streams

Oxygen is present in different types of natural gas. These affected streams of gas contain several traditional pipeline and vacuum systems. Vacuums include coal mine methane, oil recovery, and landfills. In the traditional pipeline system, there can be 100 ppm of oxygen.

Why you should remove oxygen from natural gas? 

The main reason for oxygen removal from natural gas is to avoid the corrosion and the degradation of processed chemicals. If the specification in the pipelines exceeds 10 ppm, those pipes are abandoned. However, the X-O2 can revive the gas flow so it doesn’t go to waste.

How to Find a reputed gas removal company? 

Various companies take care of gas removal. You need to check the right potentials and hire the reputed agency only.

Licensed and insured company:  If you choose a licensed and experienced company, you will not have to be afraid of any kind of exposure. Also, you will get guaranteed work from a standard company. This will put you at ease when they do their service. Then, if you go for an experienced company they will make sure that safety is the priority. You won’t find any glitch in their work and you will get a perfect job done within the said time.

Research reliable companies: You can search for oxygen removal from natural gas companies online. Many organizations claim to be the best. You have to find reliable on based on the reviews they have earned from their clients. You can even ask your colleagues or friends about a good oxygen removal agency. However, if you are unable to get the reviews or recommendations, you can directly call the service center for information. Ask about some testimonials they have from their previous customers.

Removal method: There is some standard oxygen removal method, but some companies follow their tactics. So your task is to ask them if they follow the standard procedure. Even if they have some other methods for removing oxygen if that is proper and approved. To know about the standard asbestos removal technique, you can research on the internet and then search for a company.

Reputation: You will find many oxygen removal companies near you, but not every one of them has the best reputation for industrial surfactants. You need to find a company that has earned the same with years of perfect work. You can check reviews on the internet or ask around about their reputation, and you will have an overview.

As there are different types of removal systems, it will be best if you get some information about them beforehand. Make sure the company always follows safe and standard procedures.

Contact Us:

Chemical Products Industries, Inc.

Address: 7649 SW 34th St, Oklahoma City, OK
Phone: (800) 624-4356